How To Flashing telego g401

keyword : How To Flashing telego g401 for bootloop , How To Flashing telego g401 for softbrick , How To Flashing telego g401 for hardbrick , How To Flashing telego g401 Error Camera , How To Flashing telego g401 blank screen , How To Flashing telego g401 lost password , How To Flashing telego g401 stuck logo , How To Flashing telego g401 new 2017. How To Flashing telego g401 repair phone.

DOWNLOAD FILE via Googledrive HERE

Download one of the above file:

How To Flashing telego g401

steve: hi, its steve from partselect, todaywe are going to show you how to change the interior light bulb on your microwave, it’sa really easy job, all we are going to need are a philips screwdriver, and probably autility knife, let me show you how we do it. to replace the interior light bulb on yourover the range microwave, you should probably disconnect the power, just find the receptaclethat the cord is plugged into and remove that. next we are going to remove two screws inthe grove vent, it should be accessible without lowering the microwave, if your cabinets areof standard depth then don’t protrude beyond the metal cabinet, you should be able to accessthose from the front. remove the two screws, and just open the doorup, tilt the grill vent forward, and lift

it out of its opening, and set that aside. the light bulb is in under a little coverhere, you simply lift that cover up, and pull it out, it has a little tab on the back thatfits into a slot, now if your light bulb has not been changed before, there’s probablya glove of silicone that holds the bulb in place for transport, you can now utilize autility knife, and just cut in underneath of that silicone, reach in and turn the bulb,make sure that it will turn freely, if not, double check that silicone, make sure you’vecut it free of the bulb. simply remove the old bulb, and discard it,take out a new bulb, align it up with the socket, make sure it turns freely and tightenit just snug in place, next we’ll put the

cover back in place, line up that little tabon the back, and it should lay nice and flat, and the grove vent will hold that in place,there’s a little tab on the grove vent that fits over that tab on the cover. next we’ll drop the three tabs into position,okay the grove vent back into the cabinet, and replace the two philips screws. now weare ready to reconnect the power, and our repair is complete. we told you it was an easy job, thanks forwatching, and good luck with your repair.