How To Flashing lenovo a816

keyword : How To Flashing lenovo a816 for bootloop , How To Flashing lenovo a816 for softbrick , How To Flashing lenovo a816 for hardbrick , How To Flashing lenovo a816 Error Camera , How To Flashing lenovo a816 blank screen , How To Flashing lenovo a816 lost password , How To Flashing lenovo a816 stuck logo , How To Flashing lenovo a816 new 2017. How To Flashing lenovo a816 repair phone.

DOWNLOAD FILE via Googledrive HERE

Download one of the above file:

How To Flashing lenovo a816

hi, today i show you how to replace battery in lenovo p780 it isn't as easy as in other mobile phones, because battery is placed under the phone casing. all you need is one phillips screwdriver and one little slotted screwdriver. we will start from turn off our phone. phone is turning off. when phon is turned off, we can proceed to unscrewing bolts. remove the flap. it's important to remember, that you have to remove also sim card and memory card. because without this we won't be able to get inside the phone.

bolts are placed in that places. on the edges. and one in the middle. so we start unscrewing. and here we have unscrewd phone. now we have to remove that part of the casing. we will do that by using the slotted screwdriver. you have to put the screwdiver in the area of volume buttons. slightly lever the snaps.

so as not to damage the casing. or not to scratch anything. there is no double-sided tape, so it goes lightly. the outer part is removed. remember to not lose the buttons and bolts, because it's hard to get new one. inside it looks like that. here we have another two bolts, which we also have to unscrew. after that we have to detach our battery by slotted scredriver. in that way we have removed battery. to replace battery we have to split that metal casing from the battery.

it is glued by double-sided tape already. that casing is used to press down tight the battery. that is how looks naked battery. now if we have the new battery we should place it in that metal casing. and we do everything backward. we connect the battery to the phone in that place. after that we can proceed to the screwing bolts. we begin from the two bolts, that were under the casing. so as not to leave any not screwed bolt.

now we can put that removed part of casing pressing firmly. remember to put the power button and volume buttons in their places. our phone is almost compound. just a few bolts to goal. after this we put our sim card and memory card in slots. we close the flap. here you go. our phone is turning on. the battery replaced and all works. you can enjoy you'r new battery. thanks for watching my guide, i hope, that this video helped you with your trouble.