Unlabelled How To Flashing maxx ax8 note 2

Wednesday, April 26, 2017

How To Flashing maxx ax8 note 2

    No comments


keyword : How To Flashing maxx ax8 note 2 for bootloop , How To Flashing maxx ax8 note 2 for softbrick , How To Flashing maxx ax8 note 2 for hardbrick , How To Flashing maxx ax8 note 2 Error Camera , How To Flashing maxx ax8 note 2 blank screen , How To Flashing maxx ax8 note 2 lost password , How To Flashing maxx ax8 note 2 stuck logo , How To Flashing maxx ax8 note 2 new 2017. How To Flashing maxx ax8 note 2 repair phone.




Download one of the above file:


Further to the next stage
1. Copy the file to Sd Card
2.boot into recovery mode, in the file already exists in the form of .pdf open a full tutorial and follow the instructions. anyone using flashing software.
3. When've followed all of the conditions please check the phone has been normal what is not.
4.Ciri EMMC feature of flashing not damaged in the road, still can wipe data cache. but install the update form sd card can not or will not runing.
5.booting first after install rom fair amount of time of approximately 15 minutes. Do not hurry to remove the battery. wait until the system finishes booting.

important: before doing anything on the phone to do the data backup beforehand. can pass CMW, recovery, twrp please find if you have not got.

How To Flashing maxx ax8 note 2

greetings everyone. if you have a tarot gimbal and you tried to calibrate its sensor, and this is what you got, this is because you were not facing thecamera upwards while calibrating it. the motors seem to have gone crazy but its the sensor which doesn't know where it is pointing and is trying to come to its neutral position. it youlook at the software, you'll see the camera icon, it is also doing some weird movements.

in order to fix this problem unplug the power and place the gimbal on a flat surface with camera facing upwards. make sure there is no vibration or any other movement. these instructions are there in the pdf which comes with the software which you downloaded with the driver. so now follow the standard procedure: plug in the usb gimbal, power up and on the software just simply click the calibrate button. you will notice the cameraicon on the screen

will adjust itself accordingly. now you cantest it and the camera will stay stable as it should in a properly functionalgimbal. you will notice that it vibrates sometimes when its angle goes out range which is perfectly fine. let's try one more time put it on a flat surface with camerafacing upwards in the software click the calibrate button

and the camera will adjust itself. now you can either reboot the gimbal with no usb dongle attached or simply turn the motors on in the software and the camera will position itself and will maintain its position as you move the gimbal. beautiful. now we can go and have some fun. i still have to figure out why sometimes it starts to vibrate. i think its because of the high winds, but otherwise it works fine.

No comments :

Post a Comment

Subscribe to: Post Comments ( Atom )