Unlabelled How To Flashing winmax xc7

Wednesday, July 5, 2017

How To Flashing winmax xc7

    No comments


keyword : How To Flashing winmax xc7 for bootloop , How To Flashing winmax xc7 for softbrick , How To Flashing winmax xc7 for hardbrick , How To Flashing winmax xc7 Error Camera , How To Flashing winmax xc7 blank screen , How To Flashing winmax xc7 lost password , How To Flashing winmax xc7 stuck logo , How To Flashing winmax xc7 new 2017. How To Flashing winmax xc7 repair phone.




Download one of the above file:


Further to the next stage
1. Copy the file to Sd Card
2.boot into recovery mode, in the file already exists in the form of .pdf open a full tutorial and follow the instructions. anyone using flashing software.
3. When've followed all of the conditions please check the phone has been normal what is not.
4.Ciri EMMC feature of flashing not damaged in the road, still can wipe data cache. but install the update form sd card can not or will not runing.
5.booting first after install rom fair amount of time of approximately 15 minutes. Do not hurry to remove the battery. wait until the system finishes booting.

important: before doing anything on the phone to do the data backup beforehand. can pass CMW, recovery, twrp please find if you have not got.

How To Flashing winmax xc7

you ttl usb input to your pc / laptop open device manager see do you ttl usb been detected as the prolific usb - to- serial see also ( com ? ) to me detected ( com9 ) doubleclick to setting click port setting change bits per second to 115200 open the control panel , network and internet , network and sharing center click change adapter settings yang on the right

doubleclick local area connection , properties open internet protocol version 4 ( tcp / ipv4 ) click use the following ip address , ip fill with 192.168.1.27 open tftpgui put firmware tp - link to c : // program files / tftpgui / tftproot / here open putty setting being connection type : serial serial line suitable ( com ) the detected

speed : 115200 click serial in category change flow control being none click start in tftpgui click open in putty make sure the usb ttl and cable lan connected perfect plug the power cable to tp -link up pops autobooting in 1 second quick click tpl

if less quickly will reboot continuously and rewritten from scratch plug in the power cable plug the power cable click again tpl enter the code (erase 0x9f020000 + 0x3c0000) press enter enter the code (tftpboot 0x81000000 code.bin) code.bin is firmware tp - link can be renamed with anything important clincher easy to remember press enter please wait a moment

enter the code (cp.b 0x81000000 0x9f020000 0x3c0000) press enter finally enter code (bootm 0x9f020000) open browser any enter 192.168.1.1 if it happens like this clear cache browser and try again finished adityampc.tk

No comments :

Post a Comment

Subscribe to: Post Comments ( Atom )