How To Flashing gionee v2
keyword : How To Flashing gionee v2 for bootloop , How To Flashing gionee v2 for softbrick , How To Flashing gionee v2 for hardbrick , How To Flashing gionee v2 Error Camera , How To Flashing gionee v2 blank screen , How To Flashing gionee v2 lost password , How To Flashing gionee v2 stuck logo , How To Flashing gionee v2 new 2017. How To Flashing gionee v2 repair phone.
Download one of the above file:
Further to the next stage
1. Copy the file to Sd Card
2.boot into recovery mode, in the file already exists in the form of .pdf open a full tutorial and follow the instructions. anyone using flashing software.
3. When've followed all of the conditions please check the phone has been normal what is not.
4.Ciri EMMC feature of flashing not damaged in the road, still can wipe data cache. but install the update form sd card can not or will not runing.
5.booting first after install rom fair amount of time of approximately 15 minutes. Do not hurry to remove the battery. wait until the system finishes booting.
important: before doing anything on the phone to do the data backup beforehand. can pass CMW, recovery, twrp please find if you have not got.
How To Flashing gionee v2
use a in fat / fat32 formatted usb stick. copy the downloaded zipped image file on the usb stick. unzip the file on the usb-stick. this created the folder vuplus. remove your usb-stick from your pc. the power switch off the receiver on the back and remove all hard drives or memory sticks. then insert the usb stick into the usb port on the front of the receiver. now turn on the power again. press the power button waiting not every stick works. if it does not work try another stick.
finished, you can remove the stick. waiting for reboot. make the basic settings. that was it.
No comments :
Post a Comment